McDonnell Douglas DC-9, MD80, MD90

Product Options & Information..............................................................................................................

• The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $55 (both sides).

Product Description................................................................................................................................

The Engine Inlet Plugs are custom fit for your McDonnell Douglas DC-9, MD80, MD90 intakes, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Engine plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are imprinted with the aircraft registration number in black for an extra charge. Storage bag NOT included. Engine plugs may be inserted after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... En savoir plus

Product Description................................................................................................................................

Off-Link Engine Covers protect commercial aircraft engines while in storage. They protect the engine from the elements, prevent surface contamination from oil leaks, and help stop "parts robbing". There are three types: Complete, partial and component covers.... En savoir plus

Complete covers enclose the entire engine. There are openings for mount points and engine access. Closures are heavy duty zippers, secured or tightened with straps and industrial buckles. High visibility reflective strips are sewn around the perimeter to enhance safety, and to prevent collisions from moving vehicles. Directional indicators, company insignia, and a forms pouch are sewn onto each cover. Where needed strap loops are placed at hoist points for easy and fast installation. Locking mechanisms can be installed on the cover to help prevent unauthorized access.... En savoir plus

Partial covers are designed as "Rain Caps", which cover the top and sides but do not prevent oil contamination from the engine to the surface below. Their construction details are similar to the complete cover designs, but they can be easier to install.... En savoir plus

Component Covers, such as intake or exhaust covers, are designed according to customers' specifications. A wide variety of materials and attachment details are available, as well as custom imprinting.... En savoir plus

FABRIC & THREAD: For strength, durability and ease of use we make these covers of the heaviest nylon ballistic cloth. It is sewn in multiple courses with Tenara thread, and reinforced with heavy vinyl cloth at high-wear points.... En savoir plus

Product Description................................................................................................................................

Off-Link Engine Covers protect commercial aircraft engines while in storage. They protect the engine from the elements, prevent surface contamination from oil leaks, and help stop "parts robbing". There are three types: Complete, partial and component covers.... En savoir plus

Complete covers enclose the entire engine. There are openings for mount points and engine access. Closures are heavy duty zippers, secured or tightened with straps and industrial buckles. High visibility reflective strips are sewn around the perimeter to enhance safety, and to prevent collisions from moving vehicles. Directional indicators, company insignia, and a forms pouch are sewn onto each cover. Where needed strap loops are placed at hoist points for easy and fast installation. Locking mechanisms can be installed on the cover to help prevent unauthorized access.... En savoir plus

Partial covers are designed as "Rain Caps", which cover the top and sides but do not prevent oil contamination from the engine to the surface below. Their construction details are similar to the complete cover designs, but they can be easier to install.... En savoir plus

Component Covers, such as intake or exhaust covers, are designed according to customers' specifications. A wide variety of materials and attachment details are available, as well as custom imprinting.... En savoir plus

FABRIC & THREAD: For strength, durability and ease of use we make these covers of the heaviest nylon ballistic cloth. It is sewn in multiple courses with Tenara thread, and reinforced with heavy vinyl cloth at high-wear points.... En savoir plus

Product Description................................................................................................................................

Off-Link Engine Covers protect commercial aircraft engines while in storage. They protect the engine from the elements, prevent surface contamination from oil leaks, and help stop "parts robbing". There are three types: Complete, partial and component covers.... En savoir plus

Complete covers enclose the entire engine. There are openings for mount points and engine access. Closures are heavy duty zippers, secured or tightened with straps and industrial buckles. High visibility reflective strips are sewn around the perimeter to enhance safety, and to prevent collisions from moving vehicles. Directional indicators, company insignia, and a forms pouch are sewn onto each cover. Where needed strap loops are placed at hoist points for easy and fast installation. Locking mechanisms can be installed on the cover to help prevent unauthorized access.... En savoir plus

Partial covers are designed as "Rain Caps", which cover the top and sides but do not prevent oil contamination from the engine to the surface below. Their construction details are similar to the complete cover designs, but they can be easier to install.... En savoir plus

Component Covers, such as intake or exhaust covers, are designed according to customers' specifications. A wide variety of materials and attachment details are available, as well as custom imprinting.... En savoir plus

FABRIC & THREAD: For strength, durability and ease of use we make these covers of the heaviest nylon ballistic cloth. It is sewn in multiple courses with Tenara thread, and reinforced with heavy vinyl cloth at high-wear points.... En savoir plus

Product Options & Information..............................................................................................................

• The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $55 (both sides).

Product Description................................................................................................................................

The Engine Inlet Plugs are custom fit for your McDonnell Douglas DC-9, MD80, MD90 intakes, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Engine plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are imprinted with the aircraft registration number in black for an extra charge. Storage bag NOT included. Engine plugs may be inserted after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... En savoir plus

Product Options & Information..............................................................................................................

• The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $55 (both sides).

Product Description................................................................................................................................

The Engine Inlet Plugs are custom fit for your McDonnell Douglas DC-9, MD80, MD90 intakes, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Engine plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are imprinted with the aircraft registration number in black for an extra charge. Storage bag NOT included. Engine plugs may be inserted after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... En savoir plus

Product Options & Information..............................................................................................................

• The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $55 (both sides).

Product Description................................................................................................................................

The Engine Inlet Plugs are custom fit for your McDonnell Douglas DC-9, MD80, MD90 intakes, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Engine plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are imprinted with the aircraft registration number in black for an extra charge. Storage bag NOT included. Engine plugs may be inserted after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... En savoir plus

Product Options & Information..............................................................................................................

• The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $55 (both sides).

Product Description................................................................................................................................

The Engine Exhaust Plugs are custom fit for your McDonnell Douglas DC-9, MD80, MD90 exhaust openings, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Exhaust plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are imprinted with the aircraft registration number in black for an extra charge. Exhaust plugs may be inserted soon after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... En savoir plus

Product Options & Information..............................................................................................................

• The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $55 (both sides).

Product Description................................................................................................................................

The Engine Inlet Plugs are custom fit for your McDonnell Douglas DC-9, MD80, MD90 intakes, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Engine plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are imprinted with the aircraft registration number in black for an extra charge. Storage bag NOT included. Engine plugs may be inserted after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... En savoir plus

Product Options & Information..............................................................................................................

• The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $55 (both sides).

Product Description................................................................................................................................

The Engine Inlet Plugs are custom fit for your McDonnell Douglas DC-9, MD80, MD90 intakes, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Engine plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are imprinted with the aircraft registration number in black for an extra charge. Storage bag NOT included. Engine plugs may be inserted after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... En savoir plus

Product Options & Information..............................................................................................................

• The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $55 (both sides).

Product Description................................................................................................................................

The Engine Inlet Plugs are custom fit for your McDonnell Douglas DC-9, MD80, MD90 intakes, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Engine plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are imprinted with the aircraft registration number in black for an extra charge. Storage bag NOT included. Engine plugs may be inserted after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... En savoir plus

Product Options & Information..............................................................................................................

• The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $55 (both sides).

Product Description................................................................................................................................

The Engine Exhaust Plugs are custom fit for your McDonnell Douglas DC-9, MD80, MD90 exhaust openings, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Exhaust plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are imprinted with the aircraft registration number in black for an extra charge. Exhaust plugs may be inserted soon after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... En savoir plus

Product Options & Information..............................................................................................................

• This item comes in red only.
• La marque d'immatriculation de l'aéronef (aux États-Unis: le numéro N) peut être imprimée sur ce produit pour un supplément de 25 $ (recto verso)

Product Description................................................................................................................................

McDonnell Douglas DC-9, MD80, MD90 Heat Resistant Pitot Tube Covers, are made of Naugahyde vinyl, and lined with a non-burning material. They are designed to cover the entire pitot assembly, slipping over the tube and tightening around the base with a Velcro strap detail. A "Remove Before Flight" streamer is attached to the cover. Heat Resistant Pitot Covers are an upgrade to our standard design, and help prevent the pitot cover from melting onto the tube if the pitot heat is accidentally turned on while installed. If you want the set tethered together, please let us know.... En savoir plus

Additional Information................................................................................................................................

Our heat resistant Pitot covers are lined with fireproof Nomex to prevent burn stains on the Pitot tube if the Pitot heat is activated while on the ground during maintenance procedures.  The Nomex will NOT prevent the Pitot cover from being damaged by the heat, which can be as high as 500 degrees F. (260 degrees C.), but it will prevent unsightly burn stains on the Pitot tube which cannot be removed.... En savoir plus

Product Options & Information..............................................................................................................

• La marque d'immatriculation de l'aéronef (aux États-Unis: le numéro N) peut être imprimée sur ce produit pour un supplément de 25 $ (recto verso)

Product Description................................................................................................................................

The Engine Exhaust Plugs are custom fit for your McDonnell Douglas DC-9, MD80, MD90 exhaust openings, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Exhaust plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are imprinted with the aircraft registration number in black for an extra charge. Exhaust plugs may be inserted soon after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... En savoir plus

Product Options & Information..............................................................................................................

• La marque d'immatriculation de l'aéronef (aux États-Unis: le numéro N) peut être imprimée sur ce produit pour un supplément de 25 $ (recto verso)

Product Description................................................................................................................................

The Engine Inlet Plugs are custom fit for your McDonnell Douglas DC-9, MD80, MD90 intakes, made with heavy-duty vinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed and dried if necessary. Engine plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs are imprinted with the aircraft registration number in black for an extra charge. Storage bag NOT included. Engine plugs may be inserted after flight when the engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and Engine Bungs.... En savoir plus

Product Options & Information..............................................................................................................

• La marque d'immatriculation de l'aéronef (aux États-Unis: le numéro N) peut être imprimée sur ce produit pour un supplément de 25 $ (recto verso)

Product Description................................................................................................................................

Cockpit Heatshields are interior sunshades for the aircraft's cockpit. The product is a unique composite of closed-cell foam with a silver mylar finish. The semi-rigid design is stiff enough to stand inside the window framing. The set folds up flat and is easily stored in the included storage sleeve. Some designs may require velcro and suction cups. Our Heatshields for jets are offered white side out because some aircraft manufacturers have issued advisories against reflective window inserts due to potential heat damage. A Heatshield is an excellent short-term remedy for cockpit overheating, but an external fabric cover is more effective for long-term protection.... En savoir plus

Product Options & Information..............................................................................................................

• La marque d'immatriculation de l'aéronef (aux États-Unis: le numéro N) peut être imprimée sur ce produit pour un supplément de 25 $ (recto verso)

Product Description................................................................................................................................

Heatshields are interior sunshades for an aircraft's windows or canopy glass. The product is a unique composite of closed-cell foam with a silver mylar finish. The semi-rigid design is stiff enough to stand along the inside of the windshield using sun visors or window framing. It folds up flat and easily stores in the included storage sleeve. Some designs may require velcro and suction cups. A Heatshield is an excellent short-term remedy for cockpit overheating.... En savoir plus

Product Options & Information..............................................................................................................

• This item may be available in custom colors for an additional charge. Standard color is Silver, but contact us if you want to know more.